Tuesday, 24. 5. 2011

Topic

Chairperson

Fibre-based Composites

Dr. Guy Némoz
Technical Textiles Consultant, Lyon, France

09:30 - 09:55

TTS 1.1 Compressibility of carbon woven fabrics with CNT/CNF
grown on the fibres

Prof. Stepan Lomov, Dr. Larissa Gorbatikh, Prof. Ignaas Verpoest K.U.Leuven, Department MTM, Leuven, Belgium

09:55 - 10:20

TTS 1.2 Fabrication of a cabin carrier made of textile-reinforced thermoplastic composites with a design of
high load-bearing capacity

Huangmei Lin, Prof. Dr.-Ing. Sybille Krzywinski, Prof. Dr.-Ing. Hartmut Rödel, Dr.-Ing. Olaf Diestel, Prof. Dr.-Ing. Chokri Cherif, TU Dresden (Dresden University of Technology), Institute of Textile Machinery and High Performance Material Technology (ITM), Dresden, Germany

Dr.-Ing. Georg Haasemann, TU Dresden (Dresden University of Technology), Institut für Festkörpermechanik, Dresden, Germany

10:20 - 10:45

TTS 1.3 Efficient non-crimped multi-layered and symmetric weaves for textile-reinforced composites

Roland Kleicke, Martin Kern, Adil Mountasir, Dr.-Ing. Gerald Hoffmann, Prof. Dr.-Ing. Chokri Cherif, TU Dresden (Dresden University of Technology), Institute of Textile Machinery and High Performance Material Technology (ITM), Dresden, Germany

10:45 - 11:00

Break

11:00 - 11:25

TTS 1.4 Carbon fibre-reinforced plastics with increased
thermal conductivity

Michael Glowania, Dr.-Ing. Markus Linke, Prof. Dr.-Ing. Thomas Gries, Institut für Textiltechnik (ITA) of RWTH Aachen University, Fiber reinforced composites, Aachen, Germany

Dr. Dirk Heider, Associate Professor, University of Delaware,

Newark, DE, USA

11:25 - 11:50

TTS 1.5 Requirements for the reproducible manufacturing
of spacer preforms made of glass thermoplastic hybrid yarns for composites

Michael Löser, Dr.-Ing. Andreas Mühl, Prof. Dr.-Ing. Knut Großmann, TU Dresden (Dresden University of Technology), Institute of Machine Tools and Control Engineering, Dresden, Germany

Dr.-Ing. Gerald Hoffmann, Adil Mountasir, Prof. Dr.-Ing. Chokri Cherif, TU Dresden (Dresden University of Technology), Institute of Textile Machinery and High Performance Material Technology (ITM), Dresden, Germany

11:50 - 12:15

TTS 1.6 Process adapted handling system for handing over of textile reinforcing structures into complex mould cavities 

Mirko Spieler, Dr. Frank Helbig, Dr. Wolfgang Nendel, Prof. Lothar Kroll, TU Chemnitz (Chemnitz University of Technology), Department of Lightweight Structures and Polymer Technology, Chemnitz, Germany

Topic

Chairperson

New Materials

Dr. Klaus Jansen

Forschungskuratorium Textil e.V., Berlin, Germany

14:00 - 14:35

TTS 2.1 Bionics – Idea source for innovations in fibre
based materials

Dr. Thomas Stegmaier, Andreas Scherrieble, Prof. Dr.-Ing. Heinrich Planck, Institut für Textil- und Verfahrenstechnik (ITV) of Deutsche Institute für Textil- und Faserforschung Denkendorf (DITF), Technical Textiles / Bionics, Denkendorf, Germany

14:35 - 15:00

TTS 2.2 Biobased agrotextiles (BIOAGROTEX)

Dr. Luc Ruys, Inge Welkenhuysen, Centexbel, Zwijnaarde, Belgium

15:00 - 15:25

TTS 2.3 Customization of fibre based multilayer acoustic trims
by numerical simulation

Dr. Matthias Kabel, Dr. Heiko Andrä, Fraunhofer-Institut für Techno-

und Wirtschaftsmathematik ITWM, SMS, Kaiserslautern, Germany

15:25 - 15:40

Break

15:40 - 16:05

TTS 2.4 3D weft knitted spacer fabrics for medical application

Wolfgang Trümper, Carmen Sachse, Dr.-Ing. Olaf Diestel, Prof. Dr.-Ing. Chokri Cherif, TU Dresden (Dresden University of Technology), Institute of Textile Machinery and High Performance Material Technology (ITM), Dresden, Germany

16:05 - 16:30

TTS 2.5 Technical applications of thin silicone membranes
as barrier layer

Dr. Kristin Trommer, Dr. Bernd Morgenstern, Research Institute of Leather and Plastic Sheeting (FILK), Division Plastic Sheeting, Freiberg, Germany

16:30 - 16:55

TTS 2.6 Computational investigation of geometry and permeability of woven fabrics for filtration

Jakob Barth, Prof. Dr.-Ing. Siegfried Ripperger, TU Kaiserslautern (Kaiserslautern University of Technology), The Chair of Particle Process Engineering, Kaiserslautern, Germany

Dr. Stefan Rief, Dr. Erik Glatt, Andreas Wiegmann, Fraunhofer Institute for Industrial Mathematics, Kaiserslautern, Germany

Dr. Ezzeddine Laourine, Prof. Dr.-Ing. Chokri Cherif, TU Dresden (Dresden University of Technology), Institute of Textile Machinery and High Performance Material Technology (ITM), Dresden, Germany